Chemistry data from the Environmental Impact Assessment of the Davis Sewage Outfall
Entry ID:
DAVIS_STP_Chemistry
|
[
Update this Record
]
|
Updating this record requires registration.
|
Summary
Abstract:
Untreated, macerated wastewater effluent has been discharged to the sea at Davis Station since 2005, when the old wastewater treatment infrastructure was removed. This environmental assessment was instigated to guide the choice of the most suitable wastewater treatment facility at Davis. The assessment will support decisions that enable Australia to meet the standards set for the discharge of ... wastewaters in Antarctica in national legislation (Waste Management Regulations of the Antarctic Treaty Environmental Protection Act - ATEP) and to meet international commitments (the Madrid Protocol) and to meet Australia's aspirations to be a leader in Antarctic environmental protection. The overall objective was to provide environmental information in support of an operational infrastructure project to upgrade wastewater treatment at Davis. This information is required to ensure that the upgrade satisfies national legislation (ATEP/Waste Management Regulations), international commitments (the Madrid Protocol) and maintain the AAD's status as an international leader in environmental management. The specific objectives were to: 1. Wastewater properties: Determine the properties of discharged wastewater (contaminant levels, toxicity, microbiological hazards) as the basis for recommendations on the required level of treatment and provide further consideration of what might constitute adequate dilution and dispersal for discharge to the nearshore marine environment 2. Dispersal and dilution characteristics of marine environment: Assess the dispersing characteristics of the immediate nearshore marine environment in the vicinity of Davis Station to determine whether conditions at the existing site of effluent discharge are adequate to meet the ATEP requirement of initial dilution and rapid dispersal. 3. Environmental impacts: Describe the nature and extent of impacts to the marine environment associated with present wastewater discharge practices at Davis and determine whether wastewater discharge practices have adversely affected the local environment. 4. Evaluate treatment options: Evaluate the different levels of treatment required to mitigate and/or prevent various environmental impacts and reduce environmental risks.
Purpose:
This is the master metadata record (master DIF) for the chemistry data for the project. It is linked to many datasets ranging from sediment chemistry to wastewater chemistry.
Related URL
|
Description:
Public information for ASAC project 3217
Description:
Citation reference for this metadata record and dataset
|
Geographic Coverage
(Click for Interactive Map)
Spatial coordinates
| |
N: -68.52
|
|
S: -68.66
|
|
E: 78.08
|
|
W: 77.86
|
|
|
|
Min Depth:
2 M
Max Depth:
35 M
|
Parent DIF
This data set description is a member of a collection. The
collection is described in
DAVIS_STP
Temporal Coverage
Start Date:
2009-11-01
Stop Date:
2010-03-31
Quality
All MODIS/Aqua sea ice products are considered validated at stage two, meaning that product accuracy has been assessed over a widely distributed set of locations and time periods via several ground truth and validation efforts. Quality indicators for MODIS sea ice data can be found in the following two places: ... * AutomaticQualityFlag and the ScienceQualityFlag metadata objects and their corresponding explanations: AutomaticQualityFlagExplanation and ScienceQualityFlagExplanation located in the CoreMetadata.0 global attributes * Custom local attributes associated with each SDS, for example Ice Surface Temperature. No automated quality assessment is done in this algorithm. All QA is inherited from the MOD29 product. These quality indicators are generated during production or in post-production scientific and quality checks of the data product. For more information on local and global attributes, go to one of the following links: * MOD29E1D and MYD29E1D L ocal Sea Ice Attributes, Version 5 * MOD29E1D and MYD29E1D Global Sea Ice Attributes, Version 5 The AutomaticQualityFlag is automatically set according to conditions for meeting data criteria in the sea ice algorithm. In most cases, the flag is set to either Passed or Suspect, and in rare instances, it may be set to Failed. Suspect means that a significant percentage of the data were anomalous and that further analysis should be done to determine the source of anomalies. The AutomaticQualityFlagExplanation contains a brief message explaining the reason for the setting of the AutomaticQualityFlag. The ScienceQualityFlag and the ScienceQualityFlagExplanation maybe updated after production, either after an automated QA program is run or after the data product is inspected by a qualified scientist. Content and explanation of this flag are dynamic so it should always be examined if present in the external metadata file. A sampling of products will be inspected. Random sampling or support of specific events, such as field campaigns, may also be conducted. Specific information on the science quality of the sea ice data products is reported in the ScienceQualityFlagExplanation object in the CoreMetadata.0 global attribute. The URL for the QA site is given in the product metadata and is linked to from the EOS Data Gateway (EDG) when ordering data. The ScienceQualityFlagExplanation is changed in response to analysis and should be checked for updated information. In the MYD29E1D data product, there are four instances of the ScienceQualityFlagExplanation, one for each of the two parameters, sea ice determined by reflectance data and ice surface temperature, in each of the northern and southern grids written in the metadata. See the MODIS Land Quality Assessment Web site for further details. 
Data Set Progress
IN WORK
Distribution
Distribution Media:
FTP
Distribution Size:
0.5 - 6.0 MB
Distribution Format:
GeoTIFF
Distribution Media:
FTP
Distribution Size:
0.5 - 6.0 MB
Distribution Format:
HDF-EOS
Personnel
Role:
INVESTIGATOR
Contact Address:
National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC)
Mail stop 614.1
City:
Greenbelt
Province or State:
MD
Postal Code:
20771
Role:
INVESTIGATOR
Phone:
801-585-9492
Email:
vincent.salomonson at utah.edu
Contact Address:
University of Utah
Department of Meteorology
135 S 1460 E, Rm 809
City:
Salt Lake City
Province or State:
UT
Postal Code:
84112
Country:
US
Role:
INVESTIGATOR
Phone:
301-614-5650
Email:
George.A.Riggs at nasa.gov
Contact Address:
NASA Goddard Space Flight Center (GSFC)
Science Systems and Applications, Inc.
Code 614.1
City:
Greenbelt
Province or State:
MD
Postal Code:
20771
Country:
USA
Role:
TECHNICAL CONTACT
Phone:
(Toll Free) (866) 573-3222
Phone:
(605) 594-6116
Fax:
(605) 594-6963
Email:
LPDAAC at usgs.gov
Contact Address:
LP DAAC User Services
U.S. Geological Survey (USGS)
Earth Resources Observation and Science (EROS) Center
47914 252nd Street
City:
Sioux Falls
Province or State:
SD
Postal Code:
57198-0001
Country:
USA
Publications/References
Earth Science Data and Information System (ESDIS). 1996. EOS Ground System (EGS) Systems and Operations Concept. Greenbelt, MD: Goddard Space Flight Center. Hall, Dorothy K., J. L. Foster, D. L. Verbyla, A. G. Klein, and C. S. Benson. 1998. Assessment of Snow Cover Mapping Accuracy in a Variety of Vegetation Cover Densities in Central Alaska. Remote Sensing of the Environment 66:129-137. ... Hall, Dorothy K., Jeffrey R. Key, Kimberly A. Casey, George A. Riggs, and Donald Cavalieri. May 2004. Sea Ice Surface Temperature Product From MODIS. IEEE Transactions on Geoscience and Remote Sensing 42:5. Hall, Dorothy K. and J. Martinec. 1985. Remote Sensing of Ice and Snow. London: Chapman and Hall. Hall, Dorothy K., George A. Riggs, and Vincent V. Salomonson. 1995. Development of Methods for Mapping Global Snow Cover Using Moderate Resolution Imaging Spectroradiometer (MODIS). Remote Sensing of the Environment 54(2):127-140. Hall, Dorothy K., George A. Riggs, and Vincent V. Salomonson. September 2001. Algorithm Theoretical Basis Document (ATBD) for the MODIS Snow-, Lake Ice- and Sea Ice-Mapping Algorithms. Greenbelt, MD: Goddard Space Flight Center. Hapke, B. 1993. Theory of Reflectance and Emittance Spectroscopy. Cambridge: Cambridge University Press. Key, Jeffrey R., J. B. Collins, C. Fowler, and R. S. Stone. 1997. High Latitude Surface Temperature Estimates From Thermal Satellite Data. Remote Sensing of the Environment 61:302-309. Key, Jeffrey R., J. A. Maslanik, T. Papakyriakou, Mark C. Serreze, and A. J. Schweiger. 1994. On the Validation of Satellite-Derived Sea Ice Surface Temperature. Arctic 47:280-287. Markham, B. L. and J. L. Barker. 1986. Landsat MSS and TM Post-Calibration Dynamic Ranges, Exoatmospheric Reflectances and At-Satellite Temperatures. EOSAT Technical Notes 1:3-8. MODIS Characterization and Support Team (MCST). 2000. MODIS Level-1B Product User's Guide for Level-1B Version 2.3.x Release 2. MCST Document #MCM-PUG-01-U-DNCN. Pearson II, F. 1990. Map Projections: Theory and Applications. Boca Raton, FL: CRC Press, Inc. Riggs, George A., Dorothy K. Hall, and Vincent V. Salomonson. February 2003. MODIS Sea Ice Products User Guide. Riggs, George A., Dorothy K. Hall, and S. A. Ackerman. 1999. Sea Ice Extent and Classification Mapping With the Moderate Resolution Imaging Spectroradiometer Airborne Simulator. Remote Sensing of the Environment 68:152-163. Scambos, Ted A., Terry M. Haran, and Robert Massom. In press. Validation of AVHRR and MODIS Ice Surface Temperature Products Using In Situ Radiometers. Annals of Glaciology 44. Wiscombe, W. J. and S. G. Warren. 1980. A Model for the Spectral Albedo of Snow I: Pure Snow. Journal of the Atmospheric Sciences 37:2712-2733.
Extended Metadata Properties
(Click to view more)
Creation and Review Dates
DIF Creation Date:
2008-04-02
Last DIF Revision Date:
2012-05-04
|
[
Update this Record
]
|
Updating this record requires registration.
|
|