Global Change Master Directory (GCMD)

Data Sets

Services / Tools

Ancillary Descriptions

Are you using a browser that doesn't support JavaScript or have you disabled JavaScript?

If you have disabled JavaScript, you must re-enable JavaScript to use this page.
Or you can view this record using the Text Only Format.

S-band waveguide measurements of sea-ice samples ranging from 2.6 to 3.95 GHz during the SIPEX II voyage of the Aurora Australis, 2012

Entry ID: SIPEX_II_Waveguide

[ Get Data ]
[ Update this Record ]

Summary

Abstract: This dataset contains data relating to an experimental method in which sea-ice samples were measured in an S-band microwave waveguide. This was conducted as a part of the 2012 SIPEX 2 (Sea Ice Physics and Ecosystems EXperiment) marine science voyage.

A specially designed waveguide apparatus was connected to an Agilent FieldFox Portable Network Analyzer. Small parallelopipeds (7 cm X 3 cm X 1.9 ... cm) of sea ice were cut with a hand saw in a specially designed jig which holds an initially cylindrical core. The samples were placed at the end of the waveguide, configured to measure the vertical component of the effective complex permittivity tensor, and microwaves of frequency 2.9 GHz were sent down the tube. The samples were sized precisely to fit snugly in the end of the waveguide in order to minimize spurious reflections. The FieldFox recorded the coefficients of the scattering matrix, from which the complex permittivity can be computed. Sample temperature was taken both before and immediately after insertion into the waveguide.

In order to assess the presence of off-vertical components of the electromagnetic field and how they may affect the measurements, a second sample was prepared with an orthogonal orientation, adjacent to the first sample. The same microwave measurements were taken on the second sample, to be later correlated with those from the first sample.

The samples were stored in the freezer for later crystallographic analysis, and subsequently melted for salinity measurements. Prior to melting the samples were measured using callipers to determine their dimensions precisely. Samples were measured along each face at their minimum and maximum point for their width in the direction of propagation. In most cases samples were measured in all dimensions for better error analysis. A thin vertical section, approximately 5mm thick, was taken from each microwave sample stored for analysis. These sections were placed between a pair of cross polarized plates and photographed.

Photos of the crystallography cores can be found in the crystallography folder, in a sub folder titled microwave. Each photo also contains a tag indicating the core number, site taken, date, as well as a V or an H indicating whether the sample was used for measurement of the vertical (V) or off-vertical (H) response.

The scattering parameters recorded by the Field Fox can be found in the Data folder. Each file is named according to the microwave core measurement it represents and whether the measurement was of the vertical (V) or off-vertical (H) response. Each contains a standard S11 scattering parameter, stored as a comma separated value (CSV) file. Raw data can be found in the raw folder, and data that has been processed for ease of Matlab import can be found in the Reformatted_for_matlab folder. This processing involves taking output data that by default has four entries in a single column vector and remapping the data to create a four column matrix, each with a single entry.

Recorded values for each microwave sample can be found in the Master_Core_List.xls Excel spreadsheet, within the Microwave worksheet. This worksheet was generated directly from notebook data, and contains the date, core number, depth of interface between the two collected samples, the minimum, maximum, and average thickness along the axis of propagation, The recorded temperatures from before and after measurement, the salinity, and calculated brine volume fraction. Finally, the worksheet contains notes, and a column to indicate whether we believe this data is somehow bad. Measurement information for thicknesses along other axis than that of propagation can be found in notes, but this data may at some stage be incorporated into a separate column. Please see the notes section for reasons why a data point was determined invalid. Typically this was due to the corresponding sample breaking while cutting into the parallelepiped shape.

Scans of the original notebooks containing measured salinity values, thicknesses, and temperatures from which the Permeability worksheet were created are provided in the notebooks directory.

Related URL

Link: GET DATA

Description: Download point for the data

Geographic Coverage

(Click for Interactive Map)

Spatial coordinates

N: -65.26

S: -65.29

E: 120.08

W: 119.93

N: -65.14

S: -65.26

E: 119.0

W: 118.32

N: -64.68

S: -64.87

E: 116.83

W: 115.71

Parent DIF

This data set description is a member of a collection. The collection is described in
SIPEX_II

Temporal Coverage

Start Date: 2012-10-14

Stop Date: 2012-10-31

Location Keywords

OCEAN > SOUTHERN OCEAN

CONTINENT > ANTARCTICA

GEOGRAPHIC REGION > POLAR

Science Keywords

CRYOSPHERE > SEA ICE

CRYOSPHERE > SEA ICE > ICE TEMPERATURE

OCEANS > SEA ICE

OCEANS > SEA ICE > ICE TEMPERATURE

ISO Topic Category

OCEANS

Platform

R/V AA > R/V Aurora Australis

Instrument

MR > MICROWAVE RADIOMETER

Quality In some cases the horizontal or vertical core section broke during removal, or while attempting temperature measurements following the microwave measurements.

This measurement method is experimental - an inversion and error analysis will need to be performed on this data to extract the complex permittivity tensor. Additionally the time required to reshape pieces may have changed ...

Access Constraints These data are not yet publicly available.

Use Constraints This data set conforms to the PICCCBY Attribution License
(http://creativecommons.org/licenses/by/3.0/).

Please follow instructions listed in the citation reference provided at http://data.aad.gov.au/aadc/metadata/citation.cfm?entry_id=SIPEX_II... when using these data.

Ancillary Keywords

Waveguide

Permittivity

SIPEX

Data Set Progress

IN WORK

Originating Center

Australian Antarctic Division

Data Center

Australian Antarctic Data Centre, Australia

Data Center URL: http://data.aad.gov.au

Data Center Personnel
Name: DATA OFFICER AADC Phone: +61 3 6232 3244 Fax: +61 3 6232 3351 Email: metadata at aad.gov.au Contact Address: Australian Antarctic Division 203 Channel Highway City: Kingston Province or State: Tasmania Postal Code: 7050 Country: Australia

Distribution

Distribution Media: HTTP

Distribution Size: 81 MB

Distribution Format: matlab

Fees: Free

Personnel

KENNETH M GOLDEN

Role: INVESTIGATOR

Role: TECHNICAL CONTACT

Role: DIF AUTHOR

Email: golden at math.utah.edu

Contact Address:

University of Utah

Department of Mathematics

155 S. 1400 E. JWB 233

City: Salt Lake City

Province or State: Utah

Postal Code: 84112-0090

Country: USA

DAVID LUBBERS

Role: INVESTIGATOR

Role: TECHNICAL CONTACT

Email: david.lubbers at utah.edu

Contact Address:

University of Utah

City: Salt Lake City

Province or State: Utah

Postal Code: 84112-0090

Country: USA

CHRISTIAN SAMPSON

Role: INVESTIGATOR

Role: TECHNICAL CONTACT

Email: christian.sampson at gmail.com

Contact Address:

University of Utah

City: Salt Lake City

Province or State: Utah

Postal Code: 84112-0090

Country: USA

Extended Metadata Properties

(Click to view more)

Creation and Review Dates

DIF Creation Date: 2013-02-18

Last DIF Revision Date: 2013-02-19

Reformat as FGDC document

View Text Only Format

[ Update this Record ]