Tide Gauge Records, Zhong Shan, Larsemann Hills, Australian Antarctic TerritoryEntry ID: Zhong_Shan_Tides
Abstract: Tides are measured using a submerged pressure type gauge secured in a heavy concrete mooring in Nella Fjord in the Larsemann Hills near Zhong Shan station.
Tidal records are retrieved from the gauge using an inductive loop lowered through a hole in the ice hence the gauge has been undisturbed since it was deployed.
Documentation dated 2001-06-12
Zhong Shan Submerged Tide Gauge
The gauge used ... at Zhong Shan was designed in 1991/2 by Platypus Engineering, Hobart, Tasmania.
It was intended to be submerged in about 7 metres of water in a purpose made concrete mooring in the shape of a truncated pyramid.
The mooring for the Zhong Shan gauge was cast in concrete at Davis and sling loaded by helicopter to Nella Fjord in the Larsemann Hills and deployed through a hole in the ice.
The gauge measures pressure using a Paroscientific Digiquartz Pressure Transducer with a full scale pressure of 30 psi absolute. The accuracy of the transducer is 1 in 10,000 of full scale over the calibrated temperature range.
The overall accuracy of the system is better than +/- 3 mm for a known water density.
Data is retrieved from the gauges by lowering a coil assembly on the end of a cable over a projecting knob on the top of the gauge and by use of an interface unit, a serial connection can be established to the gauge. Time setting and data retrieval can be then achieved.
Data has been retrieved from this gauge once since deployment. The records are complete since deployment.
Conversion of raw data to tidal records is done as detailed in document: Details of Conversion of Raw Data.
One attempts has been made at establishing an absolute height for this gauge using timed water level measurements.
Documentation dated 2008-10-17
The battery in the submerged gauge at Zhong Shan has probably been exhausted. The gauge will be removed at an opportune time.
The gauge has not recently been download. There will still be some records available.
Start Date: 2000-02-08
Quality The data set from the gauge at Zhong Shan is complete since deployment in February 2000.
See also the chart of available data at the URL above (Chart of available data).
Pressure and temperature data are retrieved from the submerged gauge when time and weather allow. The records are in hex format.
Records are stored as datalogger memory images and must be processed to generate *.tg files. Tidal records are checked for gross errors in height values and obvious timing errors. Further checks are done by NTC during processing.
Access Constraints Records are stored in the form in which they are retrieved from the tide gauges. Futher processing is done by the National Tidal Centre. Processed data are available in graphical form from the National Tidal Centre.
Use Constraints This data set conforms to the PICCCBY Attribution License
Please follow instructions listed in the citation reference provided at the URL below when using these data.
Data Set Progress
Role: TECHNICAL CONTACT
Role: DIF AUTHOR
Phone: +61 3 6232 3528
Fax: +61 3 6232 3351
Email: mapping at aad.gov.au
Australian Antarctic Division 203 Channel Highway
Province or State: Tasmania
Postal Code: 7050
Extended Metadata Properties
(Click to view more)
Creation and Review Dates
DIF Creation Date: 2001-06-12
Last DIF Revision Date: 2016-01-27