Projects>M - O
AIRS/Aqua Level 3 Daily standard physical retrieval (AIRS+AMSU) V005 (AIRX3STD) at GES DISCEntry ID: GES_DISC_AIRX3STD_V005
Abstract: The AIRS Level 3 Daily Gridded Product contains standard retrieval means, standard deviations and input counts. Each file covers a temporal period of 24 hours for either the descending (equatorial crossing North to South @1:30 AM local time) or ascending (equatorial crossing South to North @1:30 PM local time) orbit. The data starts at the international dateline and progresses westward (as do the ... subsequent orbits of the satellite) so that neighboring gridded cells of data are no more than a swath of time apart (about 90 minutes). The two parts of a scan line crossing the dateline are included in separate L3 files, according to the date, so that data points in a grid box are always coincident in time. The edge of the AIRS Level 3 gridded cells is at the date line (the 180E/W longitude boundary). When plotted, this produces a map with 0 degrees longitude in the center of the image unless the bins are reordered. This method is preferred because the left (West) side of the image and the right (East) side of the image contain data farthest apart in time. The gridding scheme used by AIRS is the same as used by TOVS Pathfinder to create Level 3 products. The daily Level 3 products have gores between satellite paths where there is no coverage for that day.
The geophysical parameters have been averaged and binned into 1 x 1 deg grid cells, from -180.0 to +180.0 deg longitude and from -90.0 to +90.0 deg latitude. For each grid map of 4-byte floating-point mean values there is a corresponding 4-byte floating-point map of standard deviation and a 2-byte integer grid map of counts. The counts map provides the user with the number of points per bin that were included in the mean and can be used to generate custom multi-day maps from the daily gridded products.
The thermodynamic parameters are: Skin Temperature (land and sea surface), Air Temperature at the surface, Profiles of Air Temperature and Water Vapor, Tropopause Characteristics, Column Precipitable Water, Cloud Amount/Frequency, Cloud Height, Cloud Top Pressure, Cloud Top Temperature, Reflectance, Emissivity, Surface Pressure, Cloud Vertical Distribution.
The trace gases parameters are: Total Amounts and Vertical Profiles of Carbon Monoxide, Methane, and Ozone.
The actual names of the variables in the data files should be inferred from the Processing File Description document.
(The Shortname for this product is AIRX3STD).
With the availability of newly released V6 products, this product is no longer produced effective 2013/02/28.
Data Set Citation
Dataset Originator/Creator: AIRS Science Team/Moustafa Chahine
Dataset Title: AIRS/Aqua Level 3 Daily standard physical retrieval (AIRS+AMSU)
Dataset Series Name: AIRX3STD
Dataset Release Date: 2007-07-26
Dataset Release Place: Greenbelt, MD, USA
Dataset Publisher: Goddard Earth Science Data and Information Services Center (GES DISC)
Data Presentation Form: Digital Science DataOnline Resource: http://disc.sci.gsfc.nasa.gov/datacollection/AIRX3STD_V005.html
Start Date: 2002-08-31Stop Date: 2013-02-28
Latitude Resolution: 1 degree
Longitude Resolution: 1 degree
Horizontal Resolution Range: 100 km - < 250 km or approximately 1 degree - < 2.5 degrees
Temporal Resolution: Twice per day; Day and Night; Orbital repeat cycle 16 days
ATMOSPHERE > AIR QUALITY > CARBON MONOXIDE
ATMOSPHERE > ALTITUDE > GEOPOTENTIAL HEIGHT
ATMOSPHERE > ALTITUDE > TROPOPAUSE
ATMOSPHERE > ATMOSPHERIC PRESSURE > SURFACE PRESSURE
ATMOSPHERE > ATMOSPHERIC TEMPERATURE > SURFACE TEMPERATURE
ATMOSPHERE > ATMOSPHERIC TEMPERATURE > UPPER AIR TEMPERATURE
ATMOSPHERE > ATMOSPHERIC WATER VAPOR > HUMIDITY
ATMOSPHERE > ATMOSPHERIC WATER VAPOR > PRECIPITABLE WATER
ATMOSPHERE > ATMOSPHERIC WATER VAPOR > WATER VAPOR
ATMOSPHERE > ATMOSPHERIC WATER VAPOR > WATER VAPOR PROFILES
ATMOSPHERE > CLOUDS > CLOUD PROPERTIES > CLOUD FREQUENCY
ATMOSPHERE > CLOUDS > CLOUD PROPERTIES > CLOUD TOP PRESSURE
ATMOSPHERE > CLOUDS > CLOUD PROPERTIES > CLOUD TOP TEMPERATURE
ATMOSPHERE > CLOUDS > CLOUD PROPERTIES > CLOUD VERTICAL DISTRIBUTION
ATMOSPHERE > ATMOSPHERIC RADIATION > OUTGOING LONGWAVE RADIATION
LAND SURFACE > SURFACE THERMAL PROPERTIES > SKIN TEMPERATURE
LAND SURFACE > SURFACE RADIATIVE PROPERTIES > EMISSIVITY
LAND SURFACE > SURFACE RADIATIVE PROPERTIES > REFLECTANCE
OCEANS > OCEAN TEMPERATURE > SEA SURFACE TEMPERATURE
ATMOSPHERE > ATMOSPHERIC CHEMISTRY > CARBON AND HYDROCARBON COMPOUNDS > METHANE
ATMOSPHERE > ATMOSPHERIC CHEMISTRY > OXYGEN COMPOUNDS > OZONE
Quality The V5 Level 3 gridded products are derived from the Level 2 standard swath products. The Level 2 quality indicators determine which of the Level 2 Standard Product data are combined to create the Level 3 Product. It is important that the user of Level 3 Products become familiar with these quality indicators, and we urge the user to read the documentation describing the AIRS Level 2 Standard ... Products and the AIRS Level 2 Quality Control and Error Estimation for a description of the quality indicators, how they are set and how to use them.
V5_L2_Standard Product_QuickStart.pdf (http://disc.sci.gsfc.nasa.gov/AIRS/documentation/v5_docs/AIRS_V5_Re...)
As a general rule, Level 2 retrieved quantities whose quality indicators are “best” (=0) or “good” (=1) are included in the sums that generate the Level 3 product.
Access Constraints None
Data Set Progress
Distribution Media: FTP
Distribution Size: 40 MB
Distribution Format: HDF-EOS
Role: DIF AUTHOR
Email: asghar.e.esfandiari at nasa.gov
Goddard Earth Sciences Data and Information Services Center Code 610.2 NASA Goddard Space Flight Center
Province or State: MD
Postal Code: 20771
Extended Metadata Properties
(Click to view more)
Creation and Review Dates
DIF Creation Date: 2006-11-09
Last DIF Revision Date: 2014-12-18
Future DIF Review Date: 2015-06-30