This display requires that JavaScripts be enabled in your browser. For instructions, view
Instrument: 2DC : 2D Cloud Probe
View entire text

Related Data Sets
View all records related to this instrument

1. Introduction

The Two dimensional optical array probes (2D-OAP), models 2D-C
and 2D-P, are instruments developed by Particle Measuring
Systems (PMS Inc., Boulder, Co) for the measurement of cloud and
precipitation drop size distributions. These sensors are used
primarily for the study of cloud microphysical processes,
particularly the growth of cloud drops and ice crystals through
aggregation, riming and coalescence into drizzle, rain drops,
graupel or other forms of precipitation.

2. Operating Principles

The 2Ds record the two dimensional shadows of hydrometeors as
they pass through a focussed He-Ne laser beam (Fig. 1). The
shadow is cast onto a linear diode array and the on/off state of
these diodes is stored during the particle's passage through the
laser beam. This informatio, along with the time that has passed
since the previous particle, is sent to the data system and
recorded for post-flight analysis.

Information about a particle's shape and size is deduced from
analysis of the recorded shadow with a variety of pattern
recognition algorithms. Figure 2 illustrates some measurements
by the 2D probe in several different types of clouds, ranging
from rain drops to pristine ice crystals to more complex heavily
rimed ice particles. Figure 3 is a photograph of the 2D-C in the
canister that is normally mounted on an aircraft pylon. A
complement of 2Ds is normally flown during a project to cover
the size range of interest. The 2D cloud probe (2D-C) measures
in the range from 25 mm to 800 mm and the 2D precipitation probe
(2D-P) measures in the large size range from 200 mm to 6400 mm.

Additional information available at

[Summary provided by UCAR]