Thumbnail Icon Science Keywords > OCEANS > SEA SURFACE TOPOGRAPHY


Refine by Category
 
Refine by Full text

 

270 Titles Match Your Query
Showing 1 through 50 of 270 Next
1. Barotropic Tide Model for the Pacific Basin [tide_pac]
Barotropic tide model for the Pacific Ocean. The model is based on harmonics distributed by Oregon State University (OSU) and assimilates satellite altimetry data from TOPEX/Poseidon. It was generated ...


2. HYbrid Coordinate Ocean Model (HYCOM): Global [hycom_global]
Global HYbrid Coordinate Ocean Model (HYCOM) and U.S. Navy Coupled Ocean Data Assimilation (NCODA) 3-day, daily forecast at approximately 9-km (1/12-degree) resolution. This is a demonstration product ...


3. Regional Ocean Modeling System (ROMS): CNMI [roms_mari_forecast]
Regional Ocean Modeling System (ROMS) 7-day, 3-hourly forecast for the region surrounding the Commonwealth of the Northern Mariana Islands (CNMI) at approximately 4-km resolution. While considerable ...


4. Regional Ocean Modeling System (ROMS): CNMI: Data Assimilating [roms_mari_assimilation]
Regional Ocean Modeling System (ROMS) 3-day, 3-hourly data assimilating hindcast for the region surrounding the Commonwealth of the Northern Mariana Islands (CNMI) at approximately 4-km resolution. ...


5. Regional Ocean Modeling System (ROMS): Guam [roms_marig_forecast]
Regional Ocean Modeling System (ROMS) 6-day, 3-hourly forecast for the region surrounding Guam at approximately 2-km resolution. While considerable effort has been made to implement all model components ...


6. Regional Ocean Modeling System (ROMS): Main Hawaiian Islands [roms_hiig_forecast]
Regional Ocean Modeling System (ROMS) 7-day, 3-hourly forecast for the region surrounding the main Hawaiian islands at approximately 4-km resolution. While considerable effort has been made to implement ...


7. Regional Ocean Modeling System (ROMS): Main Hawaiian Islands: Data Assimilating [roms_hiig_assimilation]
Regional Ocean Modeling System (ROMS) 3-day, 3-hourly data assimilating hindcast for the region surrounding the main Hawaiian islands at approximately 4-km resolution. While considerable effort has ...


8. Regional Ocean Modeling System (ROMS): Oahu [roms_hiog_forecast]
Regional Ocean Modeling System (ROMS) 7-day, 3-hourly forecast for the region surrounding the island of Oahu at approximately 1-km resolution. While considerable effort has been made to implement ...


9. Regional Ocean Modeling System (ROMS): Oahu South Shore [roms_hiomsg_forecast]
Regional Ocean Modeling System (ROMS) 2-day, 3-hourly forecast for the region surrounding the south shore of the island of Oahu at approximately 200-m resolution. While considerable effort has been ...


10. Regional Ocean Modeling System (ROMS): Oahu: Data Assimilating [roms_hiog_assimilation]
Regional Ocean Modeling System (ROMS) 2-day, 3-hourly data assimilating hindcast for the region surrounding the island of Oahu at approximately 1-km resolution. While considerable effort has been ...


11. Regional Ocean Modeling System (ROMS): Samoa [roms_samoa_forecast]
Regional Ocean Modeling System (ROMS) 7-day, 3-hourly forecast for the region surrounding the islands of Samoa at approximately 3-km resolution. While considerable effort has been made to implement ...


12. Regional Ocean Modeling System (ROMS): Samoa: Data Assimilating [roms_samoa_assimilation]
Regional Ocean Modeling System (ROMS) 3-day, 3-hourly data assimilating hindcast for the region surrounding the islands of Samoa at approximately 3-km resolution. While considerable effort has been ...


13. Tide Model for the Big Island of Hawaii [tide_bi]
Tide model for the Big Island of Hawaii. The model is based on climatological stratification, but 64 harmonics are used to model the full-depth baroclinic tides. The model has been run at 1km resolution, ...


14. Tide Model for the Hawaiian Islands: Main NW Islands [tide_mhi]
Tide model for the Hawaiian Islands. The model is based on climatological stratification, but 64 harmonics are used to model the full-depth baroclinic tides. The model has been run at 1km resolution, ...


15. JAMSTEC OFES (Ocean General Circulation Model for the Earth Simulator) Dataset [JAMSTEC_OFES]
OFES (OGCM for the Earth Simulator) and the Earth Simulator enable to perform decadal integrations of eddy resolving ocean simulations in the world ocean. The Earth Simulator Center (ESC) and Frontier ...


16. Japan Coastal Ocean Predictability Experiment [JCOPE]
We have started an ocean weather forecast experiment December 2001 (FRSGC Press release, 2001) as a part of the Japan Coastal Ocean Predictability Experiment (JCOPE). The JCOPE has begun October 1997 ...


17. JAMSTEC K7 Data [JAMSTEC_K7]
The main objective of the research is to construct an innovative four-dimensional variational (4D-VAR) coupled data assimilation (CDA) system capable of providing high-quality comprehensive datasets ...


18. A database of Scientific Voyages of the Australian Antarctic Programme. [DB_Voyages]
A register of all voyages that contribute to the science of the Australian Antarctic Programme. It includes voyages that opportunistically collect marine data while underway. Details have been gleaned ...


19. AAD publications database [AAD_Publications]
This database is a catalogue for the list of publications held by the Australian Antarctic Division. The database is available online at the URL given below. In some cases, pdf downloads are available, ...


20. Tide Gauge Records, Beaver Lake, Australian Antarctic Territory [Beaver_Lake]
Tides were measured using a portable pressure transducer secured to fast ice at the mouth of Pagodroma Gorge with the transducer about 4 metres below low water line. A 30 day record was obtained. ...


21. Tide Gauge Records, Casey, Australian Antarctic Territory [Casey_TG_1]
Tides are measured using a submerged pressure type gauge secured in a heavy concrete mooring at Casey. Tidal records are retrieved from the gauge using an inductive loop lowered through a hole in ...


22. Tide Gauge Records, Casey, Australian Antarctic Territory [Casey_TG_2]
Tides are measured using a submerged pressure type gauge secured in a heavy concrete mooring at Casey. Tidal records are retrieved from the gauge using an inductive loop lowered through a hole in ...


23. Tide Gauge Records, Davis, Australian Antarctic Territory [Davis_TG_1]
Tides are measured using a submerged pressure type gauge secured in a heavy concrete mooring at Davis in 7 metres of seawater. Tidal records are retrieved from the gauge using an inductive loop lowered ...


24. Tide Gauge Records, Davis, Australian Antarctic Territory [Davis_TG_2]
Tides are measured using a submerged pressure type gauge secured in a heavy concrete mooring at Davis in 7 metres of seawater. Tidal records are retrieved from the gauge using an inductive loop lowered ...


25. Tide Gauge Records, Heard Island [Heard_Tides]
Tides were measured using a portable pressure transducer secured just below low water line. A 22 hour record was obtained. A connection was made to the local Pageos benchmark by leveling and a 2 hour ...


26. Tide Gauge Records, Macquarie Island [Macquarie_Island_TG]
Tides are recorded at Macquarie Island using two sensors, one an acoustic height measuring system and the other a pressure measuring system. The raw records are stored at AADC. The records are ...


27. Tide Gauge Records, Mawson, Australian Antarctic Territory [Mawson_TG_1]
Tides are measured using a submerged pressure type gauge secured in a heavy concrete mooring in Horseshoe Harbour at Mawson. Tidal records are retrieved from the gauge using an inductive loop lowered ...


28. Tide Gauge Records, Mawson, Australian Antarctic Territory [Mawson_TG_2]
Tides are measured using a submerged pressure type gauge secured in a heavy concrete mooring in Horseshoe Harbour at Mawson. Tidal records are retrieved from the gauge using an inductive loop lowered ...


29. Tide Gauge Records, Stillwell Hills, Australian Antarctic Territory [Stillwell_Tides]
Tides were measured using a portable pressure transducer secured just below low water line. A 30 day record was obtained. Numerous manual water level measurements were made to connect the tide gauge ...


30. Tide Gauge Records, Zhong Shan, Larsemann Hills, Australian Antarctic Territory [Zhong_Shan_Tides]
Tides are measured using a submerged pressure type gauge secured in a heavy concrete mooring in Nella Fjord in the Larsemann Hills near Zhong Shan station. Tidal records are retrieved from the gauge ...


31. Global Mean Sea Level from Integrated Multi-Mission Ocean Altimeters TOPEX/Poseidon Jason-1 and OSTM/Jason-2 [PODAAC-GMSLM-TJ121]
This dataset contains the Global Mean Sea Level (GMSL) trend generated from the Integrated Multi-Mission Ocean Altimeter Data for Climate Research ( http://podaac.jpl.nasa.gov/dataset/MERGED_TP_J1_OSTM_OST_ALL ...


32. Gridded Altimeter Fields with Enhanced Coastal Coverage [PODAAC-USWCO-ALT01]
The Gridded Altimeter Fields with Enhanced Coastal Coverage data product contains Sea Surface Height Anomalies (SSHA or SLA) and zonal and meridional geostrophic velocities for the US west coast encompassing ...


33. TOPEX ALTIMETER GEOPHYSICAL DATA RECORD [PODAAC-TPGDR-BIN0A]
The TOPEX/POSEIDON GDR (Geophysical Data Record) contains global coverage altimeter data. The objective of the TOPEX/POSEIDON mission, launched in August 1992, is to determine ocean topography with ...


34. Integrated Multi-Mission Ocean Altimeter Data for Climate Research complete time series [PODAAC-ALTTS-TJ121]
This dataset contains along track geo-referenced Sea Surface Height Anomalies (SSHA) from TOPEX/Poseidon, Jason-1 and OSTM/Jason-2 (depending on time period) merged onto a single mean reference orbit. ...


35. Integrated Multi-Mission Ocean Altimeter Data for Climate Research by cycles [PODAAC-ALTCY-TJ121]
This dataset contains along track geo-referenced Sea Surface Height Anomalies (SSHA) from TOPEX/Poseidon, Jason-1 and OSTM/Jason-2 (depending on time period) merged into a single mean reference orbit. ...


36. GLAS/ICESat L1B Global Elevation Data (HDF5) [GLAH06]
GLAH06 Level-1B Global Elevation is a product that is analogous to the geodetic data records distributed for radar altimetry missions. It contains elevations previously corrected for tides, atmospheric ...


37. GLAS/ICESat L2 Ocean Altimetry Data (HDF5) [GLAH15]
GLAH06 is used in conjunction with GLAH05 to create the Level-2 altimetry products. Level-2 altimetry data provide surface elevations for ice sheets (GLAH12), sea ice (GLAH13), land (GLAH14), and ...


38. JASON-1_L2_OST_Sensory_Geophysical_Data_Record_VER-C_BINARY [PODAAC-J1SDR-BIN0C]
The Jason-1 binary Sensory Geophysical Data Record (SGDR) contains all the same parameters as the binary GDR but also contains the waveforms measured at 20 Hz. The waveforms are needed for retracking ...


39. JASON-1_L2_OST_Sensory_Geophysical_Data_Record_VER-C_BINARY Geodetic [PODAAC-J1SDR-BIG0C]
The Jason-1 binary Sensory Geophysical Data Record (SGDR) from the Geodetic mission contains all the same parameters as the binary GDR but also contains the waveforms measured at 20 Hz. The waveforms ...


40. Jason-1 Altimeter Geophysical Data Record (GDR) NetCDF [PODAAC-J1GDR-NETCC]
The Jason-1 Geophysical Data Records (GDR) contain full accuracy altimeter data, with a high precision orbit (accuracy ~2.5 cm), provided approximately 35 days after data collection. The instruments ...


41. Jason-1 Altimeter Geophysical Data Record (GDR) NetCDF Ver C Geodetic [PODAAC-J1GDR-NETGC]
The Jason-1 Geophysical Data Records (GDR) Geodetic Mission contain full accuracy altimeter data, with a high precision orbit, provided approximately 35 days after data collection. The data are sorted ...


42. Jason-1 Altimeter Interim Geophysical Data Record (IGDR) [PODAAC-J1IGD-BIN00]
The Jason-1 Interim Geophysical Data Record (IGDR) contain full accuracy altimeter data, with the exception of an interim orbit (accuracy less than 4 cm), provided within 3 days of data collection. ...


43. Jason-1 Altimeter Interim Geophysical Data Record (IGDR) NetCDF [PODAAC-J1IGD-NETC0]
The Interim Geophysical Data Record (IGDR) dataset contain full accuracy altimeter data, with the exception of an interim orbit (accuracy less than 4 cm), provided within 3 days of data collection. ...


44. Jason-1 Altimeter Sensor Interim Geophysical Data Record (SIGDR) NetCDF [PODAAC-J1SIR-NETC0]
The SIGDR is a Sensor Intermediate Geophysical Data Record from Jason-1. Data are available within a 3-5 day lag from measurement. The instruments on Jason-1 make direct observations of the following ...


45. Jason-1 Geophysical Data Record (GDR) Sea Surface Height Anomaly (SSHA) NetCDF [PODAAC-J1SHA-NETCC]
These Sea Surface Height Anomalies (SSHA) are derived from the Jason-1 Geophysical Data Record (GDR). Jason-1 is an altimetric mission whose instruments make direct observations of the following quantities: ...


46. Jason-1 Geophysical Data Record (GDR) Sea Surface Height Anomaly (SSHA) NetCDF Version C Geodetic [PODAAC-J1SHA-NETGC]
These Sea Surface Height Anomalies (SSHA) are derived from the Jason-1 Geophysical Data Record (GDR) Geodetic Mission. Jason-1 is an altimetric mission whose instruments make direct observations of ...


47. Jason-1 Interim Geophysical Data Record (IGDR) Geodetic Orbit [PODAAC-J1IGD-BINGO]
The Jason-1 Interim Geophysical Data Record (IGDR) from the Geodetic mission contain full accuracy altimeter data, with the exception of an interim orbit (accuracy less than 4 cm), provided within ...


48. Jason-1 Interim Geophysical Data Record (IGDR) NetCDF Geodetic Orbit [PODAAC-J1IGD-NETGO]
The Interim Geophysical Data Record (IGDR) Geodetic mission dataset contain full accuracy altimeter data, with the exception of an interim orbit (accuracy less than 4 cm), provided within 3 days ...


49. Jason-1 Interim Geophysical Data Record (IGDR) Sea Surface Height Anomaly (SSHA) NetCDF [PODAAC-J1IGD-SHAN0]
The Sea Surface Height Anomalies (SSHA) are derived from the Jason-1 IGDR, which has a 3-5 day time lag from measurement and a 10 day repeat. The instruments on Jason-1 make direct observations of ...


50. Jason-1 Interim Geophysical Data Record (IGDR) Sea Surface Height Anomaly (SSHA) NetCDF Geodetic Orbit [PODAAC-J1IGD-SHANG]
The Sea Surface Height Anomalies (SSHA) from the Geodetic mission are derived from the Jason-1 IGDR, which has a 3-5 day time lag from measurement and a 10 day repeat. The instruments on Jason-1 make ...


Showing 1 through 50 of 270 Next
Click here for a static view of records.

Link to Web Site