Record Search Query:
Distributed Routing Rainfall-Runoff Model
Entry ID: USGS_DR3M
Abstract: The Distributed Routing Rainfall-Runoff Model (DR3M) is a watershed model for
routing storm runoff through a Branched system of pipes and (or) natural
channels using rainfall as input. DR3M provides detailed simulation of
storm-runoff periods selected by the user. There is daily soil-moisture
accounting between storms. A drainage basin is represented as a set of
overland-flow, channel, and reservoir segments, which jointly describe the
drainage features of the basin. This model is usually used to simulate small
urban basins. Interflow and base flow are not simulated. Snow accumulation
and snow melt are not simulated.
[Summary provided by the USGS.]
ISO Topic Category
Dawdy, D.R., Lichty, R.W., and Bergmann, J.M., 1972, A rainfall-
runoff simulation model for estimation of flood peaks for small
drainage basins: U.S. Geological Survey Professional Paper 506-B,
Dawdy, D.R., Schaake, J.C., Jr., and Alley, W.M., 1978, User's guide
for distributed routing rainfall-runoff model: U.S. Geological
Survey Water-Resources Investigations Report 78-90, 146 p.
Doyle, H.W., Jr., and Miller, J.E., 1980, Calibration of a
distributed routing rainfall-runoff model at four urban sites
near Miami, Florida: U.S. Geological Survey Water-Resources
Investigations Report 80-1, 87 p.
Guay, J.R., and Smith, P.E., 1988, Simulation of quantity and
quality of storm runoff for urban catchments in Fresno,
California: U.S. Geological Survey Water-Resources
Investigations Report 88-4125, 76 p.
Leclerc, Guy, and Schaake, J.C., Jr., 1973, Methodology for
assessing the potential impact of urban development on urban
runoff and the relative efficiency of runoff control
alternatives: Ralph M. Parsons Laboratory Report no. 167,
Massachusetts Institute of Technology, 257 p.
Creation and Review Dates